[Lowfer] KU4XR QRSS-3 - ( Off Topic ) NOT lowFER

[n8tl]

On 13-05-17 05:15 PM, Andy - KU4XR wrote:
> Hi all: And thanks to those who saw the message and tried to pick
> the tiny signal from the noise.. I ran on Wed. un-announced just to
> see if anyone happened to monitor the " supposed " Beacon portion of
> 160 meters..No reports of course.. I don't expect much success at
> 250 mW into high SWR, and at QRSS-3, but that's the purpose, a very
> weak signal, " Slightly Similar " to 1750 meters ( I Hope )..
> I am not sure what speed 160 meters propagation will support..
> I figured from experience that QRSS-3 would " possibly " be the best
> rate.. I will run again tonite, but it will be late again..
> Same frequency: 1.999.900 MHz, +/- a few cycles.. Using MultiPSK to
> generate the QRSS-3 Beacon signal..
>
> 73 to all for now:
>
> Andy - KU4XR
>
> --- On Fri, 5/17/13, Charlie , W5COV <cvest at cox.net> wrote:
>
>> I didn't get down here last night to
>> set things up . Hope you do another run .
>>
>> Charlie , W5COV
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
Andy....just a suggestion.....you might try 160M WSPR and see if you are 
heard.

Cheers,

Tom N8TL