[Lowfer] KU4XR QRSS-3 - ( Off Topic ) NOT lowFER

Steve Dove dsp at hifidelity.com
Fri May 17 13:20:33 EDT 2013


Hi Andy,

Might be a good idea to put this on the (contesting.com) 
Topband reflector, too.  It might foment arm-waving 
mouth-frothing episodes amongst a few of the self-anointed to 
whom 'beacon', 'QRSS', 'science', or 'fun' seem coronary 
trigger-words, but it may well be of interest to others.

          Cheers,

                 Steve


On 5/17/2013 2:23 AM, Andy - KU4XR wrote:
> Hi all: it's not lowfer, but if you want a challenge; I am running
> QRSS-3 at 250 mW to the antenna which has an SWR of about 3.2 with
> 10 watts applied, so considerable loss from the SWR, the 250 mW is
> not getting into the ether.. Look for the signal around 1.999.900
> on 160 meters, +/- a few cycles.. If you can see the signal at all
> a QRSS-3 window is well wide enough to find it a few cycles each side.
> I am getting the 250 mW reading from my power meter.. If you get a
> capture; I sure would like to see it..I p[lan to let it run overnight.
>
> 73:
>
> Andy - KU4XR
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2904 / Virus Database: 3162/6326 - Release Date: 05/15/13
>
>


More information about the Lowfer mailing list