[Lowfer] KU4XR QRSS-3 - ( Off Topic ) NOT lowFER

[Andy - KU4XR]

Hi all: it's not lowfer, but if you want a challenge; I am running
QRSS-3 at 250 mW to the antenna which has an SWR of about 3.2 with
10 watts applied, so considerable loss from the SWR, the 250 mW is
not getting into the ether.. Look for the signal around 1.999.900
on 160 meters, +/- a few cycles.. If you can see the signal at all
a QRSS-3 window is well wide enough to find it a few cycles each side.
I am getting the 250 mW reading from my power meter.. If you get a
capture; I sure would like to see it..I p[lan to let it run overnight.

73:

Andy - KU4XR