[Lowfer] WD2XKO in CT

[jrusgrove at comcast.net]

Dex

What I do is enter all data and settings as desired, perform all tuning etc. so everything is ready 
to go. During Stefan's transmit period xx:00 - xx:15 or xx:30 - xx:45 I set the transmitter to TX 
50% duty cycle and push the TX NEXT button. This starts a TX sequence in the next 15 minute period - 
opposite Stefan. From there on out the program runs on 'auto pilot' and no further intervention is 
required.

Jay






--- Original Message ----- 
From: "Dexter McIntyre W4DEX" <dexter.mc at gmail.com>
To: "Discussion of the Lowfer (US, European, &amp;UK) and MedFer bands" <lowfer at mailman.qth.net>
Sent: Sunday, January 27, 2013 4:33 PM
Subject: Re: [Lowfer] WD2XKO in CT


> jrusgrove at comcast.net wrote:
>> Dex
>>
>> Nice daytime copy in CT. Are these the actual power levels?
> The last few showing 0.1 is may be close to actual erp. running about 75 watts to the antenna.  I 
> could not get the program to change power level at first.  Then I found it did change by exiting 
> and restarting.  Changing TX duration also required an exit and restart.  Also I am having a 
> problem with the rig keying.  Every time I click on the "tune" option the rig will key but it will 
> not key while in TX mode.  I would like to TX periods like you have been doing so I can RX in 
> between.
>
> Dex
>>
>> 2013-01-27 19:45  WD2XKO  0.137603  -25  0  EM95tg  0.1  WD2XNS  FN31ls  963  39
>> 2013-01-27 19:30  WD2XKO  0.137603  -29  -1  EM95tg  0.1  WD2XNS  FN31ls  963  39
>> 2013-01-27 19:15  WD2XKO  0.137603  -29  0  EM95tg  0.1  WD2XNS  FN31ls  963  39
>> 2013-01-27 18:45  WD2XKO  0.137603  -24  0  EM95tg  0.01  WD2XNS  FN31ls  963  39
>> 2013-01-27 18:30  WD2XKO  0.137603  -26  -1  EM95tg  0.001  WD2XNS  FN31ls  963  39
>> 2013-01-27 18:00  WD2XKO  0.137603  -26  0  EM95tg  0.001  WD2XNS  FN31ls  963  39
>> 2013-01-27 17:45  WD2XKO  0.137603  -23  -1  EM95tg  0.001  WD2XNS  FN31ls  963  39
>> Jay W1VD  WD2XNS  WE2XGR/2
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html