[Lowfer] Active Whips

[Mitch Powell]

Another piece of the puzzle - thanks for the added note Doug.
Starting a folder on this subject thread - and as Charlie W5COV said - it has been
an excellent sharing of ideas.  Thanks to everyone.
73
Mitch
On 2013-01-25, at 6:14 AM, Douglas D. Williams wrote:

> Regarding that excellent article, Jack at Clifton Labs recently advised me
> not to bury the chokes in the manner he described in the article, as it is
> virtually impossible to keep water from invading the coax after a few
> months. Instead, one could mount the choke above ground and use a ground
> rod connected to the coax shield.
> 
> 73, Doug KB4OER
> 
> On Thu, Jan 24, 2013 at 11:15 PM, Mitch Powell <mitch.powell at sympatico.ca>wrote:
> 
>> And there is an excellent picture of the installation for common mode -
>> used at Clifton - in this article.
>> 
>> http://www.cliftonlaboratories.com/vlf_signals_with_improved_setup.htm
>> 
>> Lots of great help here !
>> 73
>> Mitch
>> On 2013-01-24, at 5:05 PM, Laurence KL1 X wrote:
>> 
>>> Wonder what type he uses- J's or maybe a lower mu (77's) a wide-band non
>> res compromise?
>>> 
>> 
>> 
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>