[Lowfer] WD2XNS WSPR-15 / WOLF pre-test test

[Jay Hainline]

Can the frequency tolerance be increased in Wolf to account for drift in my 
upconverter? It is set at 1 hz right now.



Jay Hainline KA9CFD
Colchester, IL EN40om

-----Original Message----- 
From: jrusgrove at comcast.net
Sent: Sunday, February 17, 2013 15:46
To: lowfer at mailman.qth.net
Subject: [Lowfer] WD2XNS WSPR-15 / WOLF pre-test test

WD2XNS is running a 'heads up' (simultaneous) test today between WSPR-15 and 
WOLF. Currently running
a pre-test test to make sure there is no uninitended interaction. Power 
output is 10 watts each
mode.

The latest version of WOLF GUI works correctly when set to a sampling rate 
of 12000. The software
can be downloaded from http://www.qsl.net/d/dl4yhf/wolf/index.html . Make 
sure you have the latest
version (yesterday's date) and not a previous cached version. WSPR-15 is 
running at 100% duty cycle
since no other stations are currently on the air.

For this test dial frequency can be set to 136000 USB. WOLF will appear at 
136000 + 800 and WSPR-15
at 136000 + 1614. Both programs should be able to operate simultaneously.

Reports on this pre-test test are appreciated.

Jay W1VD  WD2XNS  WE2XGR/2

______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html