[Lowfer] WG2XCT WSPRX-15 Today 468 .0 KHz Dial

[Douglas D. Williams]

Did not decode your WSPR-15 signal. Have now switched to monitoring same
frequency with WSPR-2 mode, but sill using the WSPRX software.

73, Doug KB4OER

On Sun, Feb 3, 2013 at 1:13 PM, <pbunn at patbunn.com> wrote:

> I had to go back and use  WSPR 2 in the old mode program . Having some
> goofy computer issue with WSPR X . It is not handshaking properly with my
> USB to Com port converter, yet everything is fine with WSPR (old) and other
> programs. I have tried two different usb to com adapters.  With some of the
> other problems reported, I wonder if it is a Windows 7 issue.
>
> So now I am transmitting WSPR 2 at  50% transmit cycle. I am transmitting
> now.
>
> Pat
> N4LTA
> WG2XCT
>
>
>
> -----Original Message----- From: Dexter McIntyre W4DEX
> Sent: Sunday, February 03, 2013 6:01 PM
>
> To: Discussion of the Lowfer (US, European, &amp;UK) and MedFer bands
> Subject: Re: [Lowfer] WG2XCT WSPRX-15 Today 468 .0 KHz Dial
>
>
> pbunn at patbunn.com wrote:
>
>> Frequency is 468.00 on upper SSB dial.
>>
>>  TX freq and WSPRX-15 duty cycle?
>
> Dex
> ______________________________**______________________________**__
> Lowfer mailing list
> Home: http://mailman.qth.net/**mailman/listinfo/lowfer<http://mailman.qth.net/mailman/listinfo/lowfer>
> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________**______________________________**__
> Lowfer mailing list
> Home: http://mailman.qth.net/**mailman/listinfo/lowfer<http://mailman.qth.net/mailman/listinfo/lowfer>
> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>