[Lowfer] WD2XNS 137.750 JASON Mode

[jrusgrove at comcast.net]

JA

Don't notice any 'nasties' on the signal during the frequency excursions here ... how about at your 
locale? Would assume it is phase continuous.

JR


----- Original Message ----- 
From: "John Andrews" <w1tag at charter.net>
To: "Discussion of the Lowfer (US, European, &amp;UK) and MedFer bands" <lowfer at mailman.qth.net>
Sent: Sunday, December 29, 2013 9:07 AM
Subject: Re: [Lowfer] WD2XNS 137.750 JASON Mode


> JR,
>
> Decoding OK here...strong signal, obviously. For the group, the screen should show "JN" in the 
> bottom left corner, indicating Jason Normal mode. Don't enable the Fast, Slow or Turbo options.
>
> JA
>
> On 12/29/2013 9:00 AM, jrusgrove at comcast.net wrote:
>> Doug
>>
>> 137.750 is the center of the signal. I normally use cw mode with an 800
>> Hz BFO. The program allows setting other BFO offsets. Signal (if
>> visible) should fall between yellow 'guardrails'.
>>
>> Jay
>>
>> ----- Original Message ----- From: "Douglas D. Williams" <kb4oer at gmail.com>
>> To: "Discussion of the Lowfer (US, European, &amp,UK) and MedFer bands"
>> <lowfer at mailman.qth.net>
>> Sent: Sunday, December 29, 2013 8:56 AM
>> Subject: Re: [Lowfer] WD2XNS 137.750 JASON Mode
>>
>>
>>> For some reason, it won't let me select audio input device, but I see the
>>> blue bar on the left moving, so I assume it selected the proper mic
>>> port. I
>>> have random characters popping up in the window.
>>>
>>>
>>> On Sun, Dec 29, 2013 at 8:54 AM, Douglas D. Williams
>>> <kb4oer at gmail.com>wrote:
>>>
>>>> Never used Jason before, but I downloaded it and got it running. I
>>>> assume
>>>> set the receiver to USB?
>>>>
>>>>
>>>>
>>>> On Sun, Dec 29, 2013 at 8:41 AM, <jrusgrove at comcast.net> wrote:
>>>>
>>>>> From the grooveyard of forgotten favorites ... WD2XNS will be
>>>>> transmitting in Jason  mode (normal speed) for the next couple
>>>>> hours. IIRC,
>>>>> first time I've run this mode with the phasing exciter > frequency
>>>>> doubler
>>>>> > Class D setup. Print out looks okay locally.
>>>>>
>>>>> Reports appreciated.
>>>>>
>>>>> Jay W1VD  WD2XNS  WE2XGR/2  WG2XRS/2
>>>>> ______________________________________________________________
>>>>> Lowfer mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Lowfer at mailman.qth.net
>>>>> Post must be less than 50KB total for message plus attachment!
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>
>>>>
>>>>
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>>
>> Internal Virus Database is out of date.
>> Checked by AVG - www.avg.com
>> Version: 8.5.455 / Virus Database: 271.1.1/5970 - Release Date: 07/06/13 16:46:00
>>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html