[Lowfer] WG2XRS/4 [WG4XRS for short] will start at 2200 with WSPR15...

[Jay Hainline]

I am still not sure how to set up WSPR-x to send reports to the WSPR web 
site for 73 KHz. Are you choosing "other" for the band and keying in .07300 
for the dial frequency, or somehow fudging 2200m for the band with the dial 
frequency set at .07300?



Jay Hainline KA9CFD
Colchester, IL EN40om

-----Original Message----- 
From: Bob Raide
Sent: Thursday, December 12, 2013 19:46
To: rsgb_lf_group at blacksheep.org ; Bob Raide
Subject: [Lowfer] WG2XRS/4 [WG4XRS for short] will start at 2200 with 
WSPR15...

Will stay on till at least 0600 if decodes continue.  Dial freq is 73 kHz 
and 74.613 TX freq, moving down one hertz as that seems clearer as per 
Hartmut Wolff.  Have fun and GL, Bob
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html