[Lowfer] Who is on?
Mitch Powell
mitch.powell at sympatico.ca
Sat Sep 8 23:04:43 EDT 2012
Thanks Doug:
That's the answer I wanted to get - gives me some guidance.
C U L
and thanks agn for the report.
Mitch
On 2012-09-08, at 3:31 PM, Douglas D. Williams wrote:
> Thanks Mitch, especially for providing a "weak signal" for me to receive.
> ;-)
>
> I'm sure the G31 is superb, but the G33 has the extra filters, preamp,
> and better frequency stability.
>
> None of that matters a great deal at VLF/LF except the frequency stability
> (0.5 ppm VS 2.5 ppm, if I remember correctly). Gain and filtering can be
> achieved outside the receiver via L/C filters and low noise preamps, at a
> much cheaper cost than the difference in price between the G31 and the G33.
>
> I was on the verge of buying a QS1R (1 ppm frequency stability, according
> to the manufacturer), mostly because it has an external jack for a high
> stability frequency reference, until I learned from the manufacturer that
> the high stability reference needs to be 125 MHz for optimum performance.
> This dashed my hopes of using a cheap ebay 10 MHz OCXO. The lack "up front"
> information on the manufacturer's web site sealed the deal for me.
>
> -Doug
>
> On Sat, Sep 8, 2012 at 3:17 PM, Mitch Powell <mitch.powell at sympatico.ca>wrote:
>
>> Doug:
>> That's a real catch - as I think you are in a real null with my "Ashlock
>> loop"
>> antenna. Daytime catch is a real accomplishment. Running reduced power 200
>> watts.
>> I was looking at the G31 and considering it among the others, so really
>> appreciate
>> your reports.
>> Thanks again
>> 73
>>
>> Mitch
>> On 2012-09-08, at 8:30 AM, Douglas D. Williams wrote:
>>
>>> Well, it seems to work.
>>>
>>> https://dl.dropbox.com/u/33457409/MP090812.jpg
>>>
>>>
>>> Just purchased a Winradio G33DDC "Excalibur Pro". My main concerns were
>> if
>>> it would be sensitive enough for weak signal LF work, would it be stable
>>> enough for QRSS, and how well the noise blanker would do against my
>>> neighbor's electric fence. It seems to be sensitive enough to receive MP
>> in
>>> the daytime.
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Lowfer
mailing list