[Lowfer] WE2XGR/2 in JT9-10 mode

[John Andrews]

At least on this computer, WSJT-X, the low end of the receiving passband 
appears to be 1000 Hz, with no option to change it. For the JT9-2 tests 
last night, this was no issue, as the 1400-1500 Hz tones fell in the 
wider passband. But for JT9-10, you are stuck with 1000-1100 Hz.

So, I would suggest a USB dial frequency of 494.800 for this morning's 
tests. Quirky.

John, W1TAG

On 10/28/2012 8:04 AM, jrusgrove at comcast.net wrote:
> WE2XGR/2 will be testing in WSJT-X JT9-10 mode for the next few hours on 494.400 dial (+1450). This
> mode has a theoretical s/n threshold of -37 dB (relative to a 2500 Hz BW). Reports are appreciated.
> Note that it may or may not be necessary to close and restart the program after a mode change ... it
> seems to be required in transmit mode.
>
> Also, rather than using the 'canned'  CQ message when in beacon mode, the transmission will be
> WE2XGR/2 TEST ... which the program accepts ... probably a good idea for all stations transmitting
> in beacon mode.
>
> Jay W1VD  WD2XNS  WE2XGR/2
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.455 / Virus Database: 271.1.1/5356 - Release Date: 10/26/12 18:34:00
>