[Lowfer] XR in SMT-HELL 186.160 KHz

[lloyd chastant]

same here ..nothing
Lloyd

On Sun, Jan 23, 2011 at 11:38 AM,  <jrusgrove at comcast.net> wrote:
> Andy
>
> Looked last night and again this morning - not a trace of the signal.
>
> Jay W1VD  WD2XNS  WE2XGR/2
>
>
> ----- Original Message -----
> From: "Andy - KU4XR" <ku4xr at yahoo.com>
> To: " European & UK) and MedFer bandsDiscussion of the Lowfer (US" <lowfer at mailman.qth.net>
> Sent: Saturday, January 22, 2011 10:46 PM
> Subject: [Lowfer] XR in SMT-HELL 186.160 KHz
>
>
> Been watching the frequency stability thru the evening, and so far,
> the transmission will stay in an ARGO QRSS-20 window centered on
> 186.160 KHz... It will go down about 3 cycles when the heat comes on.
> QRSS-20-SLOW will show a large text on the viewer screen, and the
> slightly slower speed allows more time to dig the signal out of the
> band noise...
> Total occupied bandwidth is 6 cycles ( text height ).. A 15 Hz filter
> will easily allow for any minor drift..
> I know this isn't a DX mode by any chance, but maybe conditions will
> be quite enough for a look...
> The transmission sequence takes 17 minutes...
>
> Thanks for any reports, or captures: 73.. Back to my movie now
>
>
> Andy - KU4XR - EM75xr - Friendsville, TN. USA
>
> LOWfer Beacon " XR "
>
> Coordinates:  N:  35º 43' 54" - W:  84º 3' 16"
>
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>