[Lowfer] XR in SMT-HELL 186.160 KHz

[jrusgrove at comcast.net]

Andy

Looked last night and again this morning - not a trace of the signal.

Jay W1VD  WD2XNS  WE2XGR/2


----- Original Message ----- 
From: "Andy - KU4XR" <ku4xr at yahoo.com>
To: " European & UK) and MedFer bandsDiscussion of the Lowfer (US" <lowfer at mailman.qth.net>
Sent: Saturday, January 22, 2011 10:46 PM
Subject: [Lowfer] XR in SMT-HELL 186.160 KHz


Been watching the frequency stability thru the evening, and so far,
the transmission will stay in an ARGO QRSS-20 window centered on
186.160 KHz... It will go down about 3 cycles when the heat comes on.
QRSS-20-SLOW will show a large text on the viewer screen, and the
slightly slower speed allows more time to dig the signal out of the
band noise...
Total occupied bandwidth is 6 cycles ( text height ).. A 15 Hz filter
will easily allow for any minor drift..
I know this isn't a DX mode by any chance, but maybe conditions will
be quite enough for a look...
The transmission sequence takes 17 minutes...

Thanks for any reports, or captures: 73.. Back to my movie now


Andy - KU4XR - EM75xr - Friendsville, TN. USA

LOWfer Beacon " XR "

Coordinates:  N:  35º 43' 54" - W:  84º 3' 16"



______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html