[Lowfer] What do the WOLF data readings mean ??

[John Andrews]

Andy,

See: http://www.scgroup.com/ham/wolf.html . That explains all of the 
various readings. Some information on operation is a little dated, as we 
are pretty much all using the GUI version now. But the fundamentals 
haven't changed.

John, W1TAG

On 10/5/2010 9:12 PM, Andy - KU4XR wrote:
> Hi All:
>
> I know f: is the frequency. If it is a -.000, does that mean the
> signal WOLF is seeing is on the High side of FC ??
> And, I know I have asked this before, But I can't remember what
> the pm: , jm: , and the 2 q: readings mean ??
>
> Thanks for any help, 73 to all:
>
>
> Andy - KU4XR - EM75xr - Friendsville, TN. USA
> LOWfer Beacon " XR " @ 185.29875 KHz ( QRSS-60 )
>
> *** Temporarily OFF, while constructing a new antenna ***
>
> Coordinates:  N:  35º 43' 54" - W:  84º 3' 16"
> http://www.myspace.com/beaconxr
>
> *** The 5 most important words ever spoken ***
>
> http://ku4xr.webs.com/5mostimportantwords.htm
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.445 / Virus Database: 271.1.1/3178 - Release Date: 10/05/10 06:34:00
>