[Lowfer] WE2XGR/2 & /3 to test new ZL1BPU/ZL2AFP MSK

[lloyd chastant]

Got home too late so will try on next test..
Lloyd

On Thu, Jul 22, 2010 at 2:03 PM,  <jrusgrove at comcast.net> wrote:
> WE2XGR/3 will be running a beacon in non FEC mode, 31 baud,  from ~ 0000 - 0100Z on 510.5 kHz
>
> At 0100Z both stations will be on 510.5 kHz and carry out a QSO starting out in non FEC mode and
> likely switching to FEC mode along the way.
>
> Currently, only the ZL1BPU/ZL2AFP software can be used to decode this MSK variant. A writeup on the
> new software and link to the files to download can be found at
> http://www.qsl.net/z/zl1bpu//SOFT/msk.htm . Keep in mind that this is just an 'appetitie wetter'
> stripped down test version of a more full featured program to come in the near future. This software
> was designed primarily to effectively deal with conditions on LF so it will be interesting to see
> how it does both on 137 and 500 kHz.
>
> Reports, successful or not, are very much appreciated.
>
> Jay W1VD  WD2XNS  WE2XGR/2
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>