[Lowfer] LF Receivers?

Stan, W1LE stanw1le at verizon.net
Mon Dec 20 18:50:05 EST 2010


Hello Bill M.,

Interesting topic that should be reviewed at least annually.

I have used a ICOM IC-703+ and it is nicely frequency stable. 12V operation.

I have  also used the IC-706MK2 and it is reasonable, but could be more 
frequency stable
with an external reference that is a non standard accessory.

I have tried a HP-3585C and with an external reference from the GPS/DO 
it is very stable,
but it is a pig on AC power and takes up a lot of space on the operating 
table.

I would like to try a ICOM IC-R75
I would like to try a SDR like the units coming out specifically for 137 
and 185 KHz.

Any idea what your 6 digit grid square is ??

Stan, W1LE      Cape Cod     FN41sr




On 12/20/2010 5:34 PM, Bill & Becky wrote:
> Hi Group  I'm in the process of replacing my TT 320D receiver.  I'm looking for opinions on which receiver for LW QRSS, NDB and below 6MHz.
>
> I do not fancy getting a Transceiver because of the added cost and I'm not interested in SSB/CW HF QSO's
>
> I'm looking for time tested experience by you.........where the rubber meets the road.
>
> You may send your thoughts off list to  wmarvin at hickorytech.net
>
> Best Holidays to All
>
> Bill  KB9IV
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



More information about the Lowfer mailing list