[Lowfer] looking for information on EXP1750A

[Zack Widup]

The reference on Fred's website is for a 73 Magazine article. I wasn't
getting 73 at that time.

73, Zack W9SZ

On Thu, Sep 24, 2009 at 5:26 PM, Paul Daulton <k5wms at centurytel.net> wrote:

> Fred Reimers of FARCIRCUITS is very good about providing the articles
> that go with the boards. Perhaps he will sell you the paperwork so you
> can decide if that is right for you.
>
> If you are an ARRL member you can find a tranceiver by Curry in the QST
> archives. I belive it is cw only.
>
> I tried with no sucess to get some locals interested in a local net on
> the part 15 band. My signal is very good over a 30 mile radius day or
> night. Maybe someday...
>
> Paul k5wms
>
> Quoting Warren Ziegler <wd2xgj at gmail.com>:
> > Andy,
> >
> >    FAR circuits still lists a PCB for this:
> > http://www.farcircuits.net/tcvrs2.htm#9tcvrs
> > -- 73 Warren K2ORS
> >                 WD2XGJ
> >                 WD2XSH/23
> >                 WE2XEB/2
> >                 WE2XGR/1
> >
> >
> > On Thu, Sep 24, 2009 at 12:23 PM, alokken <alokken at gmail.com> wrote:
> > > Greetings:
> > >
> > > I've been lurking on this reflector for a year or more. I enjoy
> > > reading the conversations and following up on information presented
> > > here. I hope to put up a beacon at some point (perhaps this winter).
> > > For now, I'm concentrating on listening. I live in St. Paul, Minnesota
> > > (EN34kw) and mainly concentrate my ham radio time on VHF-UHF weak
> > > signal stuff. Maybe I like being on the periphery.
> > >
> > > I am looking for information on the EXP1750A transceiver. Anything
> > > such as manuals, photos or descriptions of others implementations with
> > > this or a similar radio.  I've looked all over the net, and not found
> > > much. I've not contacted Mr. Curry directly yet, as I don't have an
> > > email for him.
> > >
> > > Further, I have a question related to this radio: I understand it
> > > makes .5-20W output. If I understand correctly, the FCC requires less
> > > than 1W input, how have others with similar transceivers ensured that
> > > they are within the rules? Where is the input measured on such a
> > > device? At the 12V power supply?
> > >
> > > Any help would be greatly appreciated.
> > >
> > > Thanks!
> > >
> > > Andy K0AJL
> > >
> > > --
> > > _______________________________________
> > > Andy Lokken
> > > ______________________________________________________________
> > > Lowfer mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/lowfer
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Lowfer at mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html
> > >
> > ______________________________________________________________
> > Lowfer mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Lowfer at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
>
> Paul Daulton K5WMS
> beacon WMS 187.492 khz qrss30/slow 24/7
> Jacksonville,Ar 72076
> em34wu
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>