[Lowfer] What to fill the hole in with ???

[Mike-WE0H]

It'll settle in by itself. Don't use salt. It'll only cause corrosion 
problems. If it is a copper plated steel rod then you know what will 
happen when that salt finds the nicked copper on that rod...hi hi...

If the soil won't settle on it's own around the rod, take some other 
soil from somewhere and mix it up good-N thin in a bucket with water and 
pour it around the rod until it is good-N filled in.

Mike
WE0H
/16


Andy - KU4XR wrote:
> Ok:  While driving in the ground rod, it was movin around alot of
> course, and so the hole is wallowed out around the top, and for a
> little way down in the ground. What is a good conductive " something "
> that I can cram down into the hole to maybe improve contact, and
> conductivity ?? Epsom Salt ? or I've read about Bentonite, maybe
> Copper Phosphate ??  Any ideas ?? 
>
> Andy - KU4XR - EM75xr - Friendsville, TN.
> LOWfer Beacon " XR " @ 185.29866 KHz ( QRSS-60 )
> Coordinates:  N:  35* 43' 54" - W:  84* 3' 16"
> http://www.myspace.com/beaconxr