[Lowfer] XR in CT...MP also

[Andy - KU4XR]

Thanks for that capture Jay:

Based on previous captures with very dim and broken lines,
missing characters and such, I can " see " the improvements
in signal at your end. Almost, but not yet quite solid copy.
I'm still squeezing it for every mAmp of RF - " I "
Still have the antenna raising, and coil rewinding to do,
slowly but surely; I'm excited with the progress.
The thought came to me that I would never have imagined that
I would get so excited over a milliamp !

73 everyone :::


Andy - KU4XR - EM75xr - Friendsville, TN.
LOWfer Beacon " XR " @ 185.29866 KHz ( QRSS-60 )
Coordinates:  N:  35* 43' 54" - W:  84* 3' 16"
http://www.myspace.com/beaconxr


--- On Wed, 11/4/09, jrusgrove at comcast.net <jrusgrove at comcast.net> wrote:

> From: jrusgrove at comcast.net <jrusgrove at comcast.net>
> Subject: [Lowfer] XR in CT...MP also
> To: lowfer at mailman.qth.net
> Date: Wednesday, November 4, 2009, 7:49 AM
> Andy
> 
> You're hard work is paying off. You've gone from occasional
> copy last season visible most every 
> night this season...and better propagation/noise conditions
> lie ahead!
> 
> The capture below is pretty much what your signal looked
> like all night. The left side of the screen 
> shows vertical 'streaking' of the background which is
> caused by static crashes (no agc used here) 
> propagating in. This  smoothes out on the right side
> of the screen coincident with local sunrise.
> 
> http://www.w1vd.com/capture/MPXR110409.jpg
> 
> Jay W1VD  WD2XNS  WE2XGR/2 
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>