[Lowfer] Elektor SDR-IQ receiver

[n8tl]

Paul:

How tight are the filter algorithms? What is the narrowest passband?

Thanks, and Regards,

Tom N8TL

On Mon, 23 Mar 2009 23:10:19 -0500 
PAUL DAULTON <k5wms at aristotle.net> wrote:

> Tonight I managed a copy of Warren's WD2XGJ signal on my Elektor SDR rec.
>  Antenna was a pa0rdt mini whip, with
> a Dantel 300khz lowpass filter. This was my first qrss copy with the new
>  rec. Lightning map shows a line of thunderstorms
> from OKC to Des Moines. Very bad conditions but the SDR managed to pull
>  xgj out. My TS50 was no copy.
> The Elektor rec is a product of Elektor Magazine, it comes as a semi kit,
>  the circuit board is assembled and tested, one only
> needs to mount it in a box. I used a Radio Shack 4x6x2 plastic project
>  box. Cost of the Elektor rec is $140.00 us. I used 
> software by G8jcf. There is a Yahoo group for the G8JCF software.
> If any one is interested I will email you a copy of my capture and the
>  lightning map saved at the same time.
> This is my first experience with SDR, I've had mine one week so I am still
>  getting aquainted with it .
> 73 Paul Daulton K5WMS
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


-- 
n8tl <n8tl at woh.rr.com>