[Lowfer] WD2XEX WSPR Test 137.577 kHz tonight

[jrusgrove at comcast.net]

JB

In experiments here, the GUI version of the program shows a number of 
phantom signals being received that don't exist. The command line version 
running in the exact same setup works flawlessly. Suggest running the 
command line version first to see if that is working properly.

Jay


----- Original Message ----- 
From: "J. B. Weazle McCreath" <weazle at hurontel.on.ca>
To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
<lowfer at mailman.qth.net>
Sent: Friday, March 28, 2008 6:56 AM
Subject: Re: [Lowfer] WD2XEX WSPR Test 137.577 kHz tonight


> Hi John, Lowfers,
>
> I downloaded and installed the GUI version of the WSPR program
> last nite in an effort to try to copy your transmission.  I suspect that
> my lack of success was due to a botched configuration.  I followed
> your directions regarding the receiver setup, but I was unsure about
> what I should have entered in the frequency boxes of the program.
>
> I'd appreciate it very much of one of you fellows that had success
> would send me a "Print Screen" shot of your WSPR progs for me
> to compare with my setup.  Here's hoping I'll have success Friday
> evening.  Thanks in advance.
>
> 73, J.B., VE3EAR - VE3WZL
> Solar and wind powered
> Lowfer " EAR"  188.830
> EN93dr
>
> http://www.hurontel.on.ca/~weazle
>
>
> _______________________________________________
>>From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer