[Lowfer] EXP-1750 SSB/CW Lowfer Transceiver

[Zack Widup]

Hi Bill,

Happy Holidays to you!

Thanks for the info.  My TS-850SAT has an additional frequency stability
module I could add but haven't gotten around to it. Maybe I'll go looking
for one. It doesn't have 1 Hz tuning accuracy though.

Building a transmitter wouldn't be a problem. I could put something together
on a weekend.

73, Zack W9SZ

On Thu, Dec 25, 2008 at 12:47 PM, Bill Ashlock <ashlockw at hotmail.com> wrote:

> Zack,
>
> Happy Holidays!  Suggest purchasing a used Icom R-75 (as a late Xmas
> present to yourself) for Lowfer receiving and then constructing your own
> transmitter as a much better approach to becoming involved with Lowfering.
> The frequency stability of a purchased communications receiver, like the
> R-75 has, is a characteristic needed for receiving QRSS digital mode signals
> - while transceiver would have unusable drift in rereceiving digital mode
> signals. The 1 Hz dial resolution is another huge plus for the R-75.
> Also, SSB transmissions are not really practical at this low power level.
>
> Happy Lowfering!
>
> Bill A
>
>
> ------------------------------
>
> Date: Thu, 25 Dec 2008 12:12:03 -0500
> From: w9sz.zack at gmail.com
> To: lowfer at mailman.qth.net
> Subject: Re: [Lowfer] EXP-1750 SSB/CW Lowfer Transceiver
>
>
>
> I would also like to see a schematic and/or board pattern for it. I can
> make boards for my own use for just about anything.
>
> 73, Zack W9SZ
>
> On Thu, Dec 25, 2008 at 7:36 AM, Michael Lodico <k1eg at matrix-computers.com
> > wrote:
>
> Hi Brian,  I saw that radio also awhile back and have been looking for at
> least a schematic for it with no luck.  I am now looking for a qrp rig for
> 160 meters that could be coverted.
>
> 73,
> Mike K1EG
>
>
> Brian Sarkisian, KG8CO wrote:
>
> Years ago I saw pictures of the EXP-1750 SSB/CW lowfer transceiver.  I
> realize that the kit isn't in production any longer.  Does anyone have a
> users/builders manual where I can have ic and/or board pattone built from
> scratch?
>
>
> Thank You
>
>
> Brian, KG8CO
>
>
>      _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
>
>
>
> _______________________________________________
>
> From the Lowfer mailing list
>
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
>
>
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/lowfer/attachments/20081225/b16332de/attachment.htm