[Lowfer] 510.005 beacon on temp. CORRECTION

[Paul Cianciolo]

-----Original Message-----
From: lowfer-bounces at mailman.qth.net
[mailto:lowfer-bounces at mailman.qth.net]On Behalf Of Paul Cianciolo
Sent: Wednesday, October 24, 2007 6:38 PM
To: Discussion of the Lowfer (US, European, & UK) and MedFer bands
Subject: RE: [Lowfer] 510.005 beacon on temp.


Stan, All,
 Correction,

I had originally said that I was running 70 milliwatts.

Due to age, and experiments performed during the latest round of alien
abductions, I messed up the numbers.

Right now the HP RF gen I am using outputs +7 DBm
Which is just about 5 milliwatts.

Sorry about that.

I know that is very low power, and it may not be enough to propagate past my
backyard, but still would appreciate the look.

Sorry for the mistake.

PauLC


>Gentlemen,
>
>If anyone would be so kind as to look on 510.005 KHz for a beacon using a
>triangle wave as a identifier.
>The beacon currently consist of a 10' #12 vertical wire and a 2 wire
tophat.
>
>I am located about 3 miles NW of W1VD Jay, which is close to 20 miles North
>of Waterbury CT and 20 miles West of Hartford CT
>
>The ground at this early stage is a single ground rod and 2  60' radials.
>The vertical is tuned to resonance with a variometer.
>
>Power level at this time is 70 milliwatts.
>Improvements are being made as time permits.
>
>Thank you any reports would be welcomed.
>
>PaulC
>W1VLF
>
>_______________________________________________
>>From the Lowfer mailing list
>Send messages to: Lowfer at mailman.qth.net
>To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
>
>


_______________________________________________
>From the Lowfer mailing list
Send messages to: Lowfer at mailman.qth.net
To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer

_______________________________________________
>From the Lowfer mailing list
Send messages to: Lowfer at mailman.qth.net
To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer