[Lowfer] XGR CHIP64 QSO Tonight

[Mike Staines]

Thanks John. I have done the same here (my equivalent, anyway).

I see a nice strong smudge of spectrum where I expect it but I am not 
decoding anything.

I guess that is why it is a hobby!

Mike
----- Original Message ----- 
From: "John Andrews" <w1tag at w1tag.com>
To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
<lowfer at mailman.qth.net>
Sent: Sunday, November 25, 2007 7:47 PM
Subject: Re: [Lowfer] XGR CHIP64 QSO Tonight


> Mike,
>
> I'm just using CW, with the 500 Hz filter, and MultiPSK's RX frequency set 
> to my BFO pitch.
>
> I've got a signal on 508.5 until about 8:00 PM.
>
> John A.
>
> Mike Staines wrote:
>> Steve:
>> What mode (USB, LSB, CW) did you find the best copy on?
>> Tnx,
>> Mike
>> wM1ke
>> ----- Original Message ----- From: "Steve Sykes" 
>> <stevesykes at rochester.rr.com>
>> To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
>> <lowfer at mailman.qth.net>
>> Sent: Sunday, November 25, 2007 5:28 PM
>> Subject: Re: [Lowfer] XGR CHIP64 QSO Tonight
>>
>>
>>> I am receiving XGR/2 right now.  I have installed the IZ8BLY Chip64 
>>> program and am running it under Wine in Linux.  I didn't get it 
>>> installed before the short test a few minutes ago.  I am showing 505.506 
>>> USB.
>>> Steve W2SES
>>>
>>> John Andrews wrote:
>>>> Jay and I will have another QSO tonight at 0200 UTC on 508.500 kHz, 
>>>> using the CHIP64 mode found in MultiPSK. This is a spread-spectrum type 
>>>> of modulation, with a BW of about 580 Hz, hence the QSY up the band. 
>>>> Using MultiPSK, select the CHIP mode, and then the 64 button. One or 
>>>> the other of us will be on in advance, so you can play with settings. 
>>>> Reports are welcome.
>>>>
>>>> John Andrews, W1TAG / WE2XGR/3
>>>>
>>>> _______________________________________________
>>>>> From the Lowfer mailing list
>>>> Send messages to: Lowfer at mailman.qth.net
>>>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>>>
>>>
>>> _______________________________________________
>>>> From the Lowfer mailing list
>>> Send messages to: Lowfer at mailman.qth.net
>>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>
>> _______________________________________________
>>> From the Lowfer mailing list
>> Send messages to: Lowfer at mailman.qth.net
>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>
>>
>
> _______________________________________________
>>From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer