[Lowfer] XGR CHIP64 QSO Tonight

[John Andrews]

Mike,

I'm just using CW, with the 500 Hz filter, and MultiPSK's RX frequency 
set to my BFO pitch.

I've got a signal on 508.5 until about 8:00 PM.

John A.

Mike Staines wrote:
> Steve:
> What mode (USB, LSB, CW) did you find the best copy on?
> Tnx,
> Mike
> wM1ke
> ----- Original Message ----- From: "Steve Sykes" 
> <stevesykes at rochester.rr.com>
> To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
> <lowfer at mailman.qth.net>
> Sent: Sunday, November 25, 2007 5:28 PM
> Subject: Re: [Lowfer] XGR CHIP64 QSO Tonight
> 
> 
>> I am receiving XGR/2 right now.  I have installed the IZ8BLY Chip64 
>> program and am running it under Wine in Linux.  I didn't get it 
>> installed before the short test a few minutes ago.  I am showing 
>> 505.506 USB.
>> Steve W2SES
>>
>> John Andrews wrote:
>>> Jay and I will have another QSO tonight at 0200 UTC on 508.500 kHz, 
>>> using the CHIP64 mode found in MultiPSK. This is a spread-spectrum 
>>> type of modulation, with a BW of about 580 Hz, hence the QSY up the 
>>> band. Using MultiPSK, select the CHIP mode, and then the 64 button. 
>>> One or the other of us will be on in advance, so you can play with 
>>> settings. Reports are welcome.
>>>
>>> John Andrews, W1TAG / WE2XGR/3
>>>
>>> _______________________________________________
>>>> From the Lowfer mailing list
>>> Send messages to: Lowfer at mailman.qth.net
>>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>>
>>
>> _______________________________________________
>>> From the Lowfer mailing list
>> Send messages to: Lowfer at mailman.qth.net
>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer 
> 
> _______________________________________________
>> From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
> 
>