[Lowfer] Emission Designation

[Kent Andersen]

Well thats the problem there.. Im less than 1 Mile from the end of the 
runway so Im going to have
to make a really big capacitive hat. My loading coil im planning will be 
about 4' in diamater and 8' tall
im going to wind a few thousand feet on it and put some caps on the LC with 
a switch to change bands.
Im going to have to do "trickery" in the loading unfortunatly.

Kent
----- Original Message ----- 
From: "WE0H" <we0h at yahoo.com>
To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
<lowfer at mailman.qth.net>
Sent: Thursday, November 15, 2007 4:51 PM
Subject: Re: [Lowfer] Emission Designation


> Skip the max power and just list ERP. 505-515 or 505-510 would work for 
> 600 meters. Likely 505-510 rather than the other. Warren mentioned NDB's 
> or something aircraft related above 510kc I believe. Leave yourself enough 
> antenna room, unless you are close to a flight path at an airport then you 
> may have to keep them under the highest object right around you. Don't 
> want much limit in case you decide one day to put up a 100' vertical or 
> something real big.
>
> Mike
> WE0H
>
>
> Kent Andersen wrote:
>> Thanks for taking a look.. I though I had an antenna attachment there but 
>> will double check.
>> thanks for the pointing out the EIRP too
> _______________________________________________
>>From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>