[Lowfer] Cat 5 cable
paulc
[email protected]
Sat, 3 May 2003 07:50:58 -0400
Jay,
Like the old telephone engineer told us,
"Coax ain't coax all the tme"!!
That is a Trumism, By the great Clarence P. Troemel of Bell system ATT,
SNET, TCI, Comcast, etc.
Although he explained in somewhat more technical terms.
PaulC
W1VLF
-----Original Message-----
F
--snip
>
> I still dont understand how an unshielded ,twisted pair can provide
> better isolation than a piece of coax.
> but remember the frequencies involver are relatively low. The important
> factor appears to be isolation
> and a balanced twisted pair will do a better job than a shielded un
> balanced coax
Coax screen effectiveness drops off dramatically at lower frequencies- a
well balanced pair will win hands down at VF and quite a bit higher. But
remember that terminations have to be balanced as well-otherwise all bets
are off. Overall performance is determined by the design of both the cable
itself and the balance of the terminations.
--snip
> Ah the smell of watch oil and bank cleaning fluid HAR
>
No need for coffee, eh?
73, Dave, ZL3FJ
_______________________________________________
From the Lowfer mailing list
Send messages to: [email protected]
To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer