[Lowfer] WA schedule for tonight

[Bill Ashlock]

I finally have arrived (~ one month late) at the point where I will be 
transmitting on the 80ft diam 3/4" pipe loop. During the early evening hours 
I will be testing and tuning this loop to determine if everything is working 
correctly. Later in the evening, if all is OK, I will be sending my typical 
WAs with slant marker on 185.300 but with an alternating big loop/small loop 
sequence (one WA and slant per loop). Both loops are pointing in the E/W 
direction and both will have 1W inputs, so the signal should represent the 
difference in loop current x area.

Tomorrow I plan to reduce the Vcc to the large loop's final so that both 
loops will have the same current x area product and this should make both 
signals appear equal at all distances.

I will greatly appreciate ARGO signal strength measurements as well as plain 
old signal strength measurements from distances under 50 miles.

Bill


_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.  
http://join.msn.com/?page=features/virus