[Lowfer] WA sending N/S for a change

[Jay Rusgrove]

Bill

You might want to consider UPSing it and avoid all possible hassles =
(read handcuffs).=20

Jay
  ----- Original Message -----=20
  From: Bill Ashlock=20
  To: lowfer@mailman.qth.net=20
  Sent: Sunday, December 21, 2003 2:08 AM
  Subject: RE: [Lowfer] WA sending N/S for a change


  >I will build up another tuner box for the project. I also have =
another=20
  >Epson exciter
  >parts kit sitting here so I could run two beacons that would be on =
slightly=20
  >different freqs. Both my
  >Epson's are programmed for 185.302kc but they are tweak-able and most =

  >likely
  >wouldn't be exactly on the same freq anyhow.

  Based on a loop Q of say 150 and an effective bandwidth of 185.3/150 =
=3D 1.23=20
  KHz you would have to space the frequencies at a minimum of about half =
that=20
  or about .6KHz. Otherwise you would have a lot of interaction. I like =
to=20
  sequence the two transmitters via the keyer computer and use the same =
base=20
  freq.

  >How are you going to get past the A/P security with a weapon in the =
bag???
  >That might keep you tied up at the A/P for a while when they see what =
you
  >have in the luggage.

  I'll give the airline a call ahead of time to find out what to do.

  Bill A

  _________________________________________________________________
  It's our best dial-up Internet access offer: 6 months @$9.95/month. =
Get it=20
  now!  http://join.msn.com/?page=3Ddept/dialup

  _______________________________________________
  From the Lowfer mailing list
  Send messages to: Lowfer@mailman.qth.net
  To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---