[Lowfer] NMN?

Dexter McIntyre W4DEX [email protected]
Tue, 12 Aug 2003 23:16:39 -0400


Don't worry Dale.  I've had hallucinations myself after a hard day trying to
copy lowfers.

Dex

Dale Parfitt wrote:

> Hi Lyle,
> I initially considered that it might be NC- but at the same time I was
> seeing pieces of NC right where it should have been at 185.299.
> After many years digging CW out of noise on 23cM EME, this signal was a
> breeze to copy- appeared to be a carrier before and after- could even
> have been QRSS before and after.. By the time I found it on Argo, it had
> faded. I would put a 90%+ assurance factor that it was NMN.
> I also rotated the loop to place a null on NC and the signal remained.
> Not enough time to null it with the loop.
> Working backwards, I put the signal at 185.910.
>
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: [email protected]
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer