[Lowfer] T antenna

Paul A. Cianciolo [email protected]
Sat, 23 Nov 2002 14:14:20 -0500


Hey Mitch,

Are you sure all the signal isn't being picked by the "multiturn loop" you
have at the base?

Seems to me the vertical is there for show and to hold the "multiturn loop"
up from tipping over.<G>

After all you did tune the "multiturn loop"  to acquire best signal........?
<G>

I think I'm in deep doodoo now.

W1VLF

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Jay Rusgrove
Sent: Saturday, November 23, 2002 1:08 PM
To: [email protected]
Subject: Re: [Lowfer] T antenna


Mitch

And what is the ground system like?

Jay

Mitch Powell wrote:

> >
> > How big is the vertical???
> Mike:
> Approximately 45 foot vertical, with three 60 foot flat-top
> sections, extending East, West and North. At the base is a
> "DEX" type loading coil (I will try and borrow a digital camera and
> take a shot ). The coil is 2.2 mH..... Q = 350. I have a variometer
> which allows tuning between 2 - 3 mH.
> I connected everything up yesterday afternoon, and varied the
> variometer ( what else ?) and found it tuned from 148 - 175 kHz.
> I left it on 175 kHz overnight - and monitored 185.3 kHz.
> Close enough to give good results on NC - much earlier than
> normal - and surprisingly noise free reception !
>
> I have several variometer coils made up, and will continue testing.
>
> Mitch
>
>
>
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: [email protected]
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer

_______________________________________________
>From the Lowfer mailing list
Send messages to: [email protected]
To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer