[Lowfer] Frequency correction

[Lewis Denton]

Ok Bill,
     Here is what i have done , The chip wouldn't move up in freq. but it
would move down, I have moved it the max. it is now on
184.29975 drifting down to 184.29970, this was a .25/.30 shift from 185.300,
now if you move up to 185.300 we should cross.
But isn';t their someone on 184.29??.
I calibrated ARGO to WWV on 60 Hz.
the drift doesn't show on 30 sec only on 60 or higher.
I had ordered a higher freq. but had to settle with what they sent me.
apparently they aren't to accurate.when run at 5 volts they are real stable
though.
Please advise
Sorry for the intrusion.
Lewis
IP @ 184.29973 QRSS 30

PS let me know and if this isn't satisfactory, if not we will do something
else.
God Bless America
----- Original Message -----
From: "Bill Ashlock" <ashlockw@hotmail.com>
To: <lowfer@mailman.qth.net>
Sent: Tuesday, November 05, 2002 10:56 AM
Subject: [Lowfer] Frequency correction


> 185.3ers,
>
> I have claimed 185.300 for 3 years, but I have allowed WA to gradually
drift
> a bit low without correction because it didn't used to be that important.
> When Lewis came on claiming 185.3004, it looked to me that he was close to
> 185.300, but I wasn't sure that the capturer's calibration was that
> accurate. Now it's become fairly certain that I am .5 Hz low and Lewis is
> actually very close to 185.300.
>
> Lewis, I hope you can find an easy way to shift your frequency up just a
> smidge so that it is close to 185.3004. I don't really want to sound
'pushy'
> and certainly want you to remain within the 185.300 group. Can you modify
> the frequency by changing the Vcc to your Epson clock?
>
> I would never have believed as late as a year ago that we could
successfully
> pack so many signals in such a narrow band of frequencies. This is great!
>
> Bill A
>
>
> _________________________________________________________________
> Choose an Internet access plan right for you -- try MSN!
> http://resourcecenter.msn.com/access/plans/default.asp
>
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer@mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>