[Lowfer] WA is N/S tonight

Wed, 16 Jan 2002 23:58:08 -0500

Hi Steve,

Bill....I would like to watch for you on Friday night (begining at  0500Z
Sat)...can you 'turn the beam' my way for a test??

Sure can. Tomorrow night at 7:00 EST it will be an E/W signal with
alternating slant and non-slant. I use a computer to key the two loops and
it's a simple one line change in the code. Actually, I'll add a Loop
Direction line or two that will ask "what signal directions". The normal
transmission has a continuous N/S and E/W alternating pattern but I have
removed the direction change over the last two nights to allow a better
evaluation of the slant/no-slant modulation. Sorry you are out of sync with
this tonight.

Thanks in advance for your efforts. Hope you have some luck!

Bill     

> All,
>
> WA with alternating slope and non-slope code is radiating in a north/south
> direction as of 7:00 tonight. Returned screen captures from the last two
> nights have been most interesting, particularly captures made from
locations
> 90deg off to the side, where chunks of code are missing from the slanted
> portion.  Please give this a look.
>
> Bill WA
> 185.300
> QRSS30
>
> *********************************************************************
> This footnote confirms that this e-mail message has been scanned for
> the presence of known computer viruses by the MessageLabs Virus
> Control Centre. However, it is still recommended that you use
> local virus scanning software to monitor for the presence of viruses.
> *********************************************************************
>
> _______________________________________________
> Lowfer mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/lowfer

_______________________________________________
Lowfer mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/lowfer

*********************************************************************
This footnote confirms that this e-mail message has been scanned for
the presence of known computer viruses by the MessageLabs Virus 
Control Centre. However, it is still recommended that you use
local virus scanning software to monitor for the presence of viruses.
*********************************************************************