[Lowfer] NC LF now transmitting PSK2

[Mike Staines]

Same results here except that I didn't look at my captures yet.

Got home at 4:00 am (don't ask!) and there was no trace on the screen.

Mike
----- Original Message -----
From: "Jonathan Jesse" <w1jhj@netzero.net>
To: <lowfer@mailman.qth.net>
Sent: Sunday, February 10, 2002 6:28 AM
Subject: Re: [Lowfer] NC LF now transmitting PSK2


>
> Ran SpectrumLab all night with zero results.  When I got up at 5:30 this
> morning (have to work), I ran ARGO to see if there was a trace.  For about
> an hour before sunrise, I did see what could/should have been the signal.
> It was 2-3 HZ wide at it's strongest.  Does this figure to the bandwidth
of
> a PSK2 signal?  Switched back over to decode with SpectrumLab with no
> decode.  Sig faded as the sun came up over the water.
>
> JJ
>
> At 15:45 2/9/02 +0000, you wrote:
> >NC transmitting PSK2 passed the burn in test overnight.  I can copy the
> >signal Q5 when it is below audible threshold.  I am using DL4YHF's
> >"Spectrum Lab V1.7x" which can be found at:
> >
> >http://www.qsl.net/dl4yhf/spectra1.html#download
> >
> >This is a very powerful program with lots of features.
> >
> >73,
> >Dexter, W4DEX
> >For current beacon status see:
> >http://www.gostanly.com/w4dex/
>
> ----------------------------------------------------
> Sign Up for NetZero Platinum Today
> Only $9.95 per month!
> http://my.netzero.net/s/signup?r=platinum&refcd=PT97
> _______________________________________________
> Lowfer mailing list
> Lowfer@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/lowfer