[Lowfer] Co-ax/Feedline problem.

Wed, 3 Apr 2002 08:48:29 -0800

I haven't decided on an antenna yet, as I have yet to find a way to get it
into the shack.  Most likely it will be a large wire antenna, rhombic, loop
or beverage though I have had pretty good results on LW with just an 18'
whip in the past.  I have several acres of antenna space this time around.

Kurt

---
Ross Technologies Signals Intelligence Division
Rosetta Proving Grounds
----- Original Message -----
From: "John Andrews" <[email protected]>
To: <[email protected]>
Sent: Wednesday, April 03, 2002 08:39
Subject: Re: [Lowfer] Co-ax/Feedline problem.

> Kurt,
>
> > My shack is in a bad location (underground).  Running co-ax is not a
> problem
> > as I have a large conduit to the outside, but how do I get lines such as
> > ladder line or a single copper wire out without causing problems.  This
> > would be for receive only, OR is there a good co-ax for that doesn't
choke
> > off the lower frequencies from about 30 KHz to 500 KHz.  I can receive
> this
> > range great with the ground on my co-ax disconnected, just the center
pin
> > touching, would it be better to just run co-ax with no ground in my
> > situation?
>
> What sort of antenna are you using?
>
> John Andrews, W1TAG
>
> _______________________________________________
> Lowfer mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/lowfer