[LogPlus] [LOGPlus!] LOGPLUS V4Kenwood Radio Control Query

[Dennis Vernacchia]

Just switched to Ver 4.

I hadn't used Ver 3 in couple years either so had to start from scratch
trying to figure things out.......

I probably won't use VER 4 for a while but only reason I want to get it
working on my 950 is I am trying to help a ham in Mexico running
a TS-850 and Packet with Ver 4,  I recently installed for him.

Bob was kind enough to get us going but as you know, with no
index in the manual and commands scattered all over,  it's
real dificult to get some of the bells and whistles going.
And I HAVE Read manual from cover to cover several times......

Stll can't get radio control to function

Running TS-950SDX

At one moment it worked and my log showed freq and changed when I tuned
the 950.

I then went to work getting Packet Working, it works fine.

There is no PORT conflict
I am running packet on COM1 and Radio on COM2 and program verifies this.

I set radio parameters at  4800 N 8 1 (also tried 4800 N 8 2) 
(All my other programs use 4800 baud rate for my Kenwood 950)

Can't figure out what I did while setting up packet that now caused radio
control not to function. 

If someone out there is running V4 with a 940 or a 950 radio, I sure
would
wouldn't mind  spending a dime on the phone and see if we can figure what
parameter
isn't set up right.

I am using the Kenwood IF-232C external unit with the 950 

73, 

Dennis N6KI


________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

---
Submissions logplus@qth.net


--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
  application/x-msdownload
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---