[LOGic] K9JM CI-V Router

[Peter Wetzig]

G'Day,

I have no experience with the K9JM router.  I am using Logic 9, and have
been using Logic and TRX Manager for many years.

I have had some problems with driving the radio directly from Logic.  My
Elecraft K3s do not like direct connection to Logic.

Using TRX Manager to drive the radio, and using DDE from Logic, works very
well.  Usually, many more features of the radio are implemented in TRX
Manager.

Using OmniRig to drive the radio, and DDE from Logic, also works very well.

I am using OmnRig because it allows multiple programs to connect to the
radio - DX Monitor, DXLab Commander, Logic and many other tools - all at the
same time.  Each sees the radio frequency, mode etc, and can tune the radio
as needed.

If you are still having a problem, register, and ask your question on the
Logic Forum at http://www.hosenose.com/forum .

Peter VK4IU

 

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Julio Peralta
Sent: Sunday, 10 March 2013 1:01 AM
To: LOGIC LIST
Subject: [LOGic] K9JM CI-V Router

Has anyone running LOGic8 or 9 had any successes using the K9JM CI-V Router.
I can get Logic to read the radio freq upon boot up of Logic but the radio
won't respond to any other commands from Logic. On some occasions it won't
even find the comm port. The router works with TRX Manger with no problems.

 

Julio, W4HY

______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html