[LOGic] K3 Support
Dennis
dh at hosenose.com
Wed Nov 30 14:16:20 EST 2011
I have posted this here before as I recall. If not, I apologize:
*I am first redoing the Kenwood 850 driver with the new platform. If
anything doesn't work, I will do a k3-specific driver. We want to get
all of the buttons on LOGic working with the K3.*
Is this acceptable?
I will support all features that LOGic supports within limitations of
the rig. I know that the K2 allowed switching between VFOs A & B. The
K3 does not. Hopefully it will support Swap A & B (a new feature added
to LOGic 9 for rigs that use a main/sub VFO arrangement). We will get
all of the buttons on LOGic working.
LOGIc 9 also supports OmniRig, so that will be another option for the
K3. However, I expect that LOGic's native driver will actually offer
more capability.
I have gotten calls from K3 users and others complaining about OLE
errors related to the COM port and the like. This is caused by Prolific
USB=>RS232 adapters that are not fully RS-232 compatible, and is a
well-documented problem that occurs with many software packages, not
just LOGic. It is unlikely that Prolific adapters will work any better
with LOGic 9 than 8. Get an FTDI-based adapter, and the errors will go
away.
I will not buy Logic 9 if it does not _fully _support the K3, end of story.
Note that LOGic is not intended to be a remote operation program that
fully replaces the front panel of the rig. We do not attempt to support
every remote control command that a rig may have.
If that is what you need, TRX-Manager IS a remote-control program.
Laurent has a K3 and has added a lot of K3-specific features to
TRX_Manager. Does it support_everything?_ Maybe not. But it is the
most comprehensive K3 program out there. Here are some screen shots from
his web site: http://trx-manager.com/edspe.htm#k3
Tnx &73,
Dennis WN4AZY
On 11/30/2011 1:11 PM, Allen Brier N5XZ wrote:
>
> Thanks for the input, Ed. I am forwarding this to Dennis.
>
> I have already prepaid for LOGic 9 but am considering cancelling the
> order without positive input from Dennis.
>
> Allen N5XZ
>
>
> -----Original Message-----
> From: W0SD Ed Gray
> Sent: Nov 30, 2011 11:45 AM
> To: Allen Brier N5XZ , "logic at mailman.qth.net"
> Subject: Re: [LOGic] K3 Support
>
> I am blessed to own three K3's but far more importantly the K3's
> are all over the world and not just here in the USA with many,
> many of them sold so it should be supported. Also since it and
> Ten Tec are the main USA made radios I sure think the USA based
> Logic company should support the K3's. Lastly it is one of the top
> radios in the world according to the Sherwood Engineering report
> and at a reasonable price so why would you not support it??? To me
> it is a no brainer if you want to sell software you support the K3?
>
> I will not buy Logic 9 if it does not fully support the K3, end of
> story.
>
> Ed W0SD
>
> On 11/30/2011 11:38 AM, Allen Brier N5XZ wrote:
>> I am in agreement with W5WVO: Dennis needs to implement native K3 support. It is a PITA without it.
>>
>> Allen N5XZ
>>
>>
>> -----Original Message-----
>>> From:logic-request at mailman.qth.net
>>> Sent: Nov 30, 2011 9:04 AM
>>> To:logic at mailman.qth.net
>>> Subject: LOGic Digest, Vol 91, Issue 12
>>>
>>> Send LOGic mailing list submissions to
>>> logic at mailman.qth.net
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://mailman.qth.net/mailman/listinfo/logic
>>> or, via email, send a message with subject or body 'help' to
>>> logic-request at mailman.qth.net
>>>
>>> You can reach the person managing the list at
>>> logic-owner at mailman.qth.net
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of LOGic digest..."
>>>
>>>
>>> Today's Topics:
>>>
>>> 1. QRZ.com change kills LOGic 8 (Bill VanAlstyne W5WVO)
>>> 2. Re: QRZ.com change kills LOGic 8 (Julio Peralta)
>>> 3. Re: QRZ.com change kills LOGic 8 (JACK)
>>> 4. Re: QRZ.com change kills LOGic 8 (Warren Elly)
>>> 5. Re: QRZ.com change kills LOGic 8 (Larry Osborne)
>>> 6. Re: QRZ.com change kills LOGic 8 (Dave)
>>> 7. Re: QRZ.com change kills LOGic 8 (Warren Elly)
>>> 8. Re: QRZ.com change kills LOGic 8 (Robert Brady)
>>>
>>>
>>> ----------------------------------------------------------------------
>>>
>>> Message: 1
>>> Date: Wed, 30 Nov 2011 13:44:11 -0000
>>> From: "Bill VanAlstyne W5WVO"<w5wvo at cybermesa.net>
>>> Subject: [LOGic] QRZ.com change kills LOGic 8
>>> To:<LOGic at mailman.qth.net>
>>> Message-ID:<7737AB5CF2AD494EA093CAC3BAA3B022 at BILLHP9250>
>>> Content-Type: text/plain; charset="UTF-8"
>>>
>>> QRZ.com has come out with a new look, and apparently under-the-hood changes have rendered it toxic to LOGic 8. Any auto-lookup in QRZ.com now crashes the Callbook applet and requires killing LOGic 8 through Task Manager, cleaning, relaunching, etc. I?m assuming this problem is due to QRZ.com?s upgrade, but if no one else is having a problem with this, then perhaps I need some help with my setup. Please let me know.
>>>
>>> I would assume that LOGic 9 coming out and QRZ.com upgrading is an unhappy coincidence. I do NOT want to have to wait for LOGic 9 (which I?m not even sure I?m going to buy at this point, given continuing lack of K3 support -- incomprehensible) to fix access to QRZ.com, which is indispensible for a DXer trying to keep up with dozens of DXpeditions on a daily basis.
>>>
>>> I am running 8.0.104, but I doubt any higher LOGic 8 revision (if there is one) will fix this, as QRZ.com was just updated in the past 24-48 hours or so. Does anyone have knowledge of any fixes for this, or at least a timeline for a LOGic 8 fix? Please don?t tell me it will be fixed in LOGic 9...
>>>
>>> Bill W5WVO
>>>
>>>
>>> ------------------------------
>>>
>> ______________________________________________________________
>> LOGic mailing list
>> Home:http://mailman.qth.net/mailman/listinfo/logic
>> Help:http://mailman.qth.net/mmfaq.htm
>> Post:mailto:LOGic at mailman.qth.net
>>
>> This list hosted by:http://www.qsl.net
>> Please help support this email list:http://www.qsl.net/donate.html
>>
>>
More information about the LOGic
mailing list