[LOGic] Elecraft K3 Driver

[Dave Reed]

I just went through this in January when I purchased a K3, Glenn.  I really
liked LOGic, but after being unable to get it working with the K3, the
solution was DXLab Suite (I had to switch to a different logger).  It has
been a lot of work converting 17,000+ QSOs, but I'm almost done.  Converting
has been much more difficult than it should have been because LOGic is
marginally ADIF 1.0 compliant while the rest of the world is at ADIF 2.x.
But, even so, I wish LOGic worked with the K3 because it has the best user
interface of anything available.

73,
Dave, NX7F


-----Original Message-----
From: Glenn [mailto:wb5tuf at earthlink.net] 
Sent: Saturday, June 20, 2009 05:32
To: logic at mailman.qth.net
Subject: [LOGic] Elecraft K3 Driver

Is there a driver for the K3 for Logic 8?

I have tried the drivers for the K2 and all of the Kenwoods, but they
require interface resets after every other tune command.

The K3 drivers in Writelog, N1MM, and HRD work great.

73,
Glenn WB5TUF