[LOGic] No spots

[K0DAN]

If the URL in your DXSummit window shows a small number of requested spots
(25 or 100), and the window says "download complete", the spots should be
merged into the Spot Log window in a matter of seconds. However, if the URL
requests 1000 or 10,000 spots, that merge sort could take several minutes.

If you have a totally BLANK Spot Log window, take a look at the "setup" tab
in Spot Log and make sure all the options look logical, select "no
prefilter", and in the prefilter box, try
.T.

Also Click on the "band setup" option and make sure you have bands/modes
properly set up for spotting.

Finally, the DXSummit web site has changed a bunch in the past few 
months...and Dennis has changed LOGic to compensate for those 
changes....requires the latest LOGic version, and also new URL's to plug 
into the DXSummit window.

Good luck.

73
Dan
K0DAN


----- Original Message ----- 
From: "Jack McNees" <k4ijq at comporium.net>
To: <logic at mailman.qth.net>
Sent: Tuesday, January 20, 2009 1:48 PM
Subject: [LOGic] No spots


> My DX Summit window shows spots, my Spot Log window shows none.  I have
> the
> latest Logic and tables updates installed.  In Spot Log window, Show All
> is
> checked and Display Lock is off.  From what I read, that should show every
> spot.  Any ideas?
>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>