[LOGic] Data type mismatch

[Sante - IK0HBN]

Thank you Mel,
can you give a look at my card report and understand why Logic 
repeated the same band for all the qso within the same card, if Freq 
was not specified?
If you agree I could send my file.
TIA
Sante


At 21.23 11/01/2009, you wrote:
>No quotes around frequency... it is numeric, not a string.
>
>
>----- Original Message -----
>From: "Sante - IK0HBN" <ik0hbn at libero.it>
>To: <logic at mailman.qth.net>
>Sent: Saturday, January 10, 2009 7:07 PM
>Subject: [LOGic] Data type mismatch
>
>
> > Hi guys,
> > may you help me in troubleshooting this error?
> > One step back....
> >
> > Mauro, IK0CHU helped me at putting at work a report done by Hal, NN8L
> > some years ago that I should use to print qso's direct on qsl card.
> > My card accepts till 4 qso's for card, so we were able to print them
> > without problem, putting the FREQ read on the log directly on the card.
> >
> > As I began with radio more than 20 years ago, old logging program did
> > not save the frequency in the log itself, so Mauro put an expression
> > that filled the missing frequency with the band, eg 20M, 15M and so on.
> >
> > If I had only a qso with BAND printed on the card, everthing runs
> > fine here, but if I have more than a qso to have printed on the card,
> > if this /these qos's had the band to be printed too,
> > the result was having the first qso with the correct band on the
> > card, and from the second to the fourth, if exist, having the same
> > band of the first qso.
> > EG.
> > 1 qso: 20M (OK)
> > 2 qso: 15M (got printed 15M)
> > 3 qso: 40M  got printed 15M).
> > As unable to fix the report, we thought to put a "static frequency"
> > in all the FREQ field having care to respect bandplan, so:
> > 1 qso on 14 CW, should write 14.000
> > 1 qso on 14 RTTY , 14090
> > 1 qso on ssb 14250,
> > so to force the report to print the frequency on the card. We use
> > MASS CHANGE in ADVANCED
> > We did the following expression:
> > replace freq with "14.243" for BAND='20M' AND EMPTY(FREQ) AND MODE='SSTV'
> >
> > but we got Data type Mismatch.
> > Any idea for both the problem or even the last one?
> > Thank you
> > Sante
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > LOGic at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/logic
>_______________________________________________
>LOGic mailing list
>LOGic at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/logic