[LOGic] Problems still with Mode Table <?>

[Mel Martin]

You also should do a clean and re-build indexes after changing the mode 
size... and you may want to adjust the form for the wider mode.

Brian Clark wrote:
> Hi Bob:
> 
> The Readers Digest version:
> 
> Go to tools/misc utilities/change size of log fields.  After changing Mode to 6, go to tools/setup/modes and make sure nothing there is truncated.
> 
> Brian, VE1MC
> http://users.eastlink.ca/~gryhnd/
> 
> 
> --- On Mon, 10/20/08, Longpath <longpath at ysquared.net> wrote:
> 
>> From: Longpath <longpath at ysquared.net>
>> Subject: RE: [LOGic] Problems still with Mode Table <?>
>> To: "LOGic is open to all radio amateurs for discussion of LOGic logging  program" <logic at mailman.qth.net>
>> Received: Monday, October 20, 2008, 8:52 AM
>> Hi Bob
>>
>> This is an old problem. I had the same problem when I put
>> BPSK31 into the
>> mode table about three years ago I am surprised Dennis has
>> not fixed the
>> issue yet.
>>
>> The problem is the mode table is set up for a max of 5
>> characters by
>> default. BPSK31 is 6 characters long. You need to change
>> the max value to
>> six characters (or higher if you want) then put BPSK31 into
>> the mode table.
>>
>> Its been so long ago I can't remember exactly where to
>> go in Logic to do it
>> but it works.
>>
>> 73
>>
>> Peter
>> EI9ES
>>
>> -----Original Message-----
>> From: logic-bounces at mailman.qth.net
>> [mailto:logic-bounces at mailman.qth.net]On Behalf Of Mel
>> Martin
>> Sent: 20 October 2008 03:11
>> To: nt5a at txun.net; LOGic is open to all radio amateurs for
>> discussion of
>> LOGic logging program
>> Subject: Re: [LOGic] Problems still with Mode Table
>> <?>
>>
>>
>> Do you have a BPSK31 in your mode table.
>> If I remember correctly, Logic is initially set up for a 5
>> character
>> mode. You may need to change that to 6 characters.
>>
>> Bob Ahrens wrote:
>>> Well, I am still wrestling with my "mode
>> table" issue . . .
>>> As near as I can tell, everything is OK there, but my
>> log form still
>>> does not display "BPSK31" when I log a call.
>>>
>>> Is there someplace else I should be looking?  How
>> about an interface
>>> problem with MixW?  Did my reinstall of both programs
>> mess up something?
>>> Any other ideas?
>>>
>>> Thanks mucho!
>>>
>>> 73 de NT5A
>>> Bob
>>>
>>> _______________________________________________
>>> LOGic mailing list
>>> LOGic at mailman.qth.net
>>> http://mailman.qth.net/mailman/listinfo/logic
>> --
>> Mel, VE2DC
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
>>
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
> 

-- 
Mel, VE2DC