[LOGic] Problems still with Mode Table <?>

[Brian Clark]

Hi Bob:

If you refer to Chapter 5 in the manual, I think that will solve your field problem. I had to do the same thing several years ago when I started using the various digital modes. Like everything else once you do, then you say wow that was easy, but until you figure it out these little adjustments are always a brain teaser..hi

Brian, VE1MC
http://users.eastlink.ca/~gryhnd/


--- On Mon, 10/20/08, Longpath <longpath at ysquared.net> wrote:

> From: Longpath <longpath at ysquared.net>
> Subject: RE: [LOGic] Problems still with Mode Table <?>
> To: "LOGic is open to all radio amateurs for discussion of LOGic logging  program" <logic at mailman.qth.net>
> Received: Monday, October 20, 2008, 8:52 AM
> Hi Bob
> 
> This is an old problem. I had the same problem when I put
> BPSK31 into the
> mode table about three years ago I am surprised Dennis has
> not fixed the
> issue yet.
> 
> The problem is the mode table is set up for a max of 5
> characters by
> default. BPSK31 is 6 characters long. You need to change
> the max value to
> six characters (or higher if you want) then put BPSK31 into
> the mode table.
> 
> Its been so long ago I can't remember exactly where to
> go in Logic to do it
> but it works.
> 
> 73
> 
> Peter
> EI9ES
> 
> -----Original Message-----
> From: logic-bounces at mailman.qth.net
> [mailto:logic-bounces at mailman.qth.net]On Behalf Of Mel
> Martin
> Sent: 20 October 2008 03:11
> To: nt5a at txun.net; LOGic is open to all radio amateurs for
> discussion of
> LOGic logging program
> Subject: Re: [LOGic] Problems still with Mode Table
> <?>
> 
> 
> Do you have a BPSK31 in your mode table.
> If I remember correctly, Logic is initially set up for a 5
> character
> mode. You may need to change that to 6 characters.
> 
> Bob Ahrens wrote:
> > Well, I am still wrestling with my "mode
> table" issue . . .
> >
> > As near as I can tell, everything is OK there, but my
> log form still
> > does not display "BPSK31" when I log a call.
> >
> > Is there someplace else I should be looking?  How
> about an interface
> > problem with MixW?  Did my reinstall of both programs
> mess up something?
> >
> > Any other ideas?
> >
> > Thanks mucho!
> >
> > 73 de NT5A
> > Bob
> >
> > _______________________________________________
> > LOGic mailing list
> > LOGic at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/logic
> 
> --
> Mel, VE2DC
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
> 
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com