[LOGic] Problems still with Mode Table <?>

[Longpath]

Hi Bob

This is an old problem. I had the same problem when I put BPSK31 into the
mode table about three years ago I am surprised Dennis has not fixed the
issue yet.

The problem is the mode table is set up for a max of 5 characters by
default. BPSK31 is 6 characters long. You need to change the max value to
six characters (or higher if you want) then put BPSK31 into the mode table.

Its been so long ago I can't remember exactly where to go in Logic to do it
but it works.

73

Peter
EI9ES

-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net]On Behalf Of Mel Martin
Sent: 20 October 2008 03:11
To: nt5a at txun.net; LOGic is open to all radio amateurs for discussion of
LOGic logging program
Subject: Re: [LOGic] Problems still with Mode Table <?>


Do you have a BPSK31 in your mode table.
If I remember correctly, Logic is initially set up for a 5 character
mode. You may need to change that to 6 characters.

Bob Ahrens wrote:
> Well, I am still wrestling with my "mode table" issue . . .
>
> As near as I can tell, everything is OK there, but my log form still
> does not display "BPSK31" when I log a call.
>
> Is there someplace else I should be looking?  How about an interface
> problem with MixW?  Did my reinstall of both programs mess up something?
>
> Any other ideas?
>
> Thanks mucho!
>
> 73 de NT5A
> Bob
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic

--
Mel, VE2DC
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic