[LOGic] Logic 8 with microHam MK

[Mel Martin]

That is probably the version on the CD

... Mel


James C. Hall, MD wrote:
> Hi Greg:
>
> I didn't know you hung around this reflector ! HI  I think I see 
> what's been going on. I just went home for lunch and re-checked the 
> version of my Logic installation - it's 8.0.57. This did not change 
> when I over-installed with the CD-ROM. Conclusion: the maintenance 
> upgrade never 'took' and left the program in an unstable state.
>
> I guess I now need to retry the update.
>
> 73, Jamie
> WB4YDL
>
>
>
> Greg Tomerlin wrote:
>>
>> Same here.  After installing the latest LoGic 8 Maintenance release 
>> my radio and LoGic would frequently lose contact with each other.  A 
>> quick Reset Radios... on the Tool menu repairs the connection, but 
>> only temporarily.  This morning I reinstalled LoGic 8 over the top of 
>> my current installation, using the LoGic 8 CD, but have not had a 
>> chance to run the program.  I'm hoping it fixed it.
>>
>> WindowsXP Pro / 1.8 GHz Pentium 4 / 1G Ram
>> MicroHam MicroKeyer digital interface
>> IC-756 PII
>> LoGic 8
>>
>>
>> 73 Greg  K4KO
>>
>>
>> James C. Hall, MD wrote:
>>  > I am having trouble since upgrading to the latest maintenance 
>> release of
>>> Logic 8 with the serial port to the rig timing out at irregular 
>>> times. I use
>>> a microHAM microKeyer with virtual serial port 7 as the rig control 
>>> port.
>>> What happens is that the program will work well for awhile and then 
>>> suddenly
>>> quit talking to the rig
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
>>
>>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>