[LOGic] Logic 8 and Microham Interfaces

[Stan]

Mel Martin wrote:
> They *must* be unchecked.
>

I have tried both ways checked and unchecked.



> Have you configured a PTT line in Logic for use with the keyer? 
> Normally you don't need to. Do you still have a problem if CW and CW 
> PTT are both set to None.
>
Have tried it both ways but when I found out Logic doesn't send Cw well, 
I set both to none.




> Also make sure that W1EL (WinKeyer) port is disabled.

It is disabled, no comport selected.

>
> I use 9600 baud... works with all Icoms... but I don't think that 
> should be a problem.
>

I have tried all baud rates my icom is capable of. No difference. Also 
have tried CI-V transceive off.

>  
>
> Also, I never use COM1-COM4 for USB ports... since they are often 
> reserved for MB com ports or plug-in cards. Superstitious maybe ;-)
>
> I use COM5 for rig control, COM6 for Winkey and COM7 for FSK.
>
Have tried many different com port settings



> Other than that... I really can't think of anything else.
>  

Me either.I have spent way too much time the last couple weeks trying to 
get this to work. When I bought Logic 8 I talked to Dennis about the 
problem. he basically told me it was Microhams's
problem and I should contact Microham.

I don't believe this as EVERYTHING else I have used in the last 2 years 
has worked with this interface. Not one problem until I met Logic 8....

 I G I V E up.

Stan K9IUQ