[LOGic] a few more logic questions..

[Ken Brookner]

hi bill!

you bet!  i'd appreciate looking at how you did this.  please email it to me
when you get time.  sounds like just what i need to take a look at.

73,
kenb, ky5g

____________________
Ken Brookner
kenb at brookner.com
 

> -----Original Message-----
> From: Bill [mailto:k1uq at comcast.net] 
> Sent: Tuesday, January 17, 2006 5:01 AM
> To: 'Ken Brookner'; 'LOGic is open to all radio amateurs for 
> discussion of LOGic loggingprogram'
> Subject: RE: [LOGic] a few more logic questions..
> 
> Ken,
> 
> I made a QSL card report that may do what you want ... or be 
> used to borrow from, or learn from.
> 
> Here are basics of what my QSL card is and does:
> 
> Back of Card - first report
> Prints a table w/ QSO info for 8 contacts and automatically 
> enters information under the following columns: Your Call (DX 
> call sign), D-M-Y, UTC, Band, MHz, Mode, RST, QSL (PSE or 
> TNX; automatic), and My Call (which is whatever call sign I 
> was using at time I made contact; report allows for any call 
> sign I have used)
> 
> It automatically enters other info on card from user fields including:
> Rig, Antenna, Amp, Other (equipment such as a tuner, etc) How 
> the QSL is to be sent (bureau, direct, with green stamps, 
> etc.) Who to send the QSL to - both the DX call and manager's 
> call signs, prominently displayed (large text inside shaded box).
> My call sign (large, unique font), followed by address lines 
> A text line (comments) A "tag line" that is determined (I 
> type what I want or I can bypass) with each print batch.
> 
> Front of Card - second report
> Prints automatically:
> Top of card - My call sign in Large unique font. (Again, 
> whatever call I had at time of QSO) Bottom of card -  "<My 
> Call Sign> Confirms QSO with <DX Call Sign>"
> My own graphic design (map of USA)
> 
> If I was mobile or portable, both front and back will 
> automatically utilize K1UQ/M (or P) for example. And if 
> mobile, the county I was in along with town/state where I was 
> operating is printed.
> 
> To do all of this requires added user form fields.
> 
> My card is setup to print on pre-perforated 8.5 x 11 inch 
> stock and bursts into four equal sized cards - no scrap 
> strips to tear off.
> 
> I also have another similar report which I did some years 
> ago.  It is a longer card and utilizes a double windowed 
> business size envelope. Once printed, all that need be done 
> with this card is put in envelope, seal, and stick on a 
> stamp. Outgoing and return addresses show in windows.
> 
> If interested, I can email to you.
> 
> PDA / Dennis - - - would you like it to put on your web site??
> 
> Regards, Bill K1UQ