[LOGic] Spot Log sends wrong info to Log?

[George Vincent K3GV]

Instead of adjusting the time interval, just uncheck the "Timer Enable" box. 
If you do this, it will be necessary to manually request spots.

73,
George K3GV
Moderator LOGic Reflector
DX: Long may it live !

If it isn't LOGic, then it isn't LOGging

All Outgoing E-Mail Has Been Scanned By Norton AntiVirus 2005

----- Original Message ----- 
From: "Jeff Griffin" <kb2m at comcast.net>
To: "'LOGic is open to all radio amateurs for discussion of LOGic 
loggingprogram'" <logic at mailman.qth.net>
Sent: Monday, February 20, 2006 6:41 AM
Subject: Re: [LOGic] Spot Log sends wrong info to Log?


> Try changing the interval you have set to for a spot update to a larger 
> number of minutes. This is set in the DXSCAPE window for example.
>
> 73 Jeff kb2m
>
> ----- Original Message ----- 
> From: "Rich Kelly" <richpdc at centurytel.net>
> To: "'LOGic is open to all radio amateurs for discussion of LOGic 
> loggingprogram'" <logic at mailman.qth.net>
> Sent: Sunday, February 19, 2006 8:55 PM
> Subject: RE: [LOGic] Spot Log sends wrong info to Log?
>
>
>>I have seen this sort of situation happen to me when the spots are coming 
>>in
>> at about the same time as I transfer the info from the spot log to the 
>> log.
>> Maybe this is a possibility for you too?? It seems that the info from the
>> telnet or terminal window is in the "buffer" and not yet transferred to 
>> the
>> spotlog when I click on the spotlog to transfer that info.
>>
>> I'm not sure if anything can be done about it or if this is actually what 
>> is
>> happening to you, but it is something to consider.
>>
>> Rich Kelly
>> KB9RNO
>>
>> -----Original Message-----
>> From: logic-bounces at mailman.qth.net 
>> [mailto:logic-bounces at mailman.qth.net]
>> On Behalf Of KS4S Nyles
>> Sent: Sunday, February 19, 2006 7:07 PM
>> To: logic at mailman.qth.net
>> Subject: [LOGic] Spot Log sends wrong info to Log?
>>
>> Does anyone know what the reason is for Logic sending the wrong info to 
>> the
>> log when double clicking on the spot log?
>>
>> About 30% of the time, I can click on a Call in the spot log, and the 
>> wrong
>> call entirely ( and the associated info shown in the spot log) shows up 
>> in
>> the log form.  It does not matter if it general logging or a contest 
>> form.
>>
>> The problem is intermittent, and after a couple of tries, hitting esc to 
>> not
>> enter the data into the log, then clicking again on the spot log it will
>> finally go. Sometimes it works fine.
>>
>> There is no radio associated with the program to automatically set the 
>> VFO,
>> and the box for that option in the spot log form is not checked to do 
>> that.
>>
>> It makes it frustrating to use, having to double check it as you go.  It 
>> is
>> impossible to use for even slow "search and pounce" entries on a casual
>> contest when it behaves like this.
>>
>> Thanks for any suggestions,
>>
>> Nyles
>> KS4S
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>