[LOGic] Spot Log sends wrong info to Log?

[mel martin]

It's a weakness in Logic... I've always had the same problem. Dennis tried
to mitigate it by adding a "Display Lock" check box. What you are supposed
to do is lock the display before clicking a spot, then un-click it. A little
too cumbersome for my liking.

> -----Original Message-----
> From: logic-bounces at mailman.qth.net 
> [mailto:logic-bounces at mailman.qth.net] On Behalf Of KS4S Nyles
> Sent: February 19, 2006 20:07
> To: logic at mailman.qth.net
> Subject: [LOGic] Spot Log sends wrong info to Log?
> 
> 
> Does anyone know what the reason is for Logic sending the 
> wrong info to the log when double clicking on the spot log?
> 
> About 30% of the time, I can click on a Call in the spot log, 
> and the wrong call entirely ( and the associated info shown 
> in the spot log) shows up in the log form.  It does not 
> matter if it general logging or a contest form.
> 
> The problem is intermittent, and after a couple of tries, 
> hitting esc to not enter the data into the log, then clicking 
> again on the spot log it will finally go. Sometimes it works fine.
> 
> There is no radio associated with the program to 
> automatically set the VFO, and the box for that option in the 
> spot log form is not checked to do that.
> 
> It makes it frustrating to use, having to double check it as 
> you go.  It is impossible to use for even slow "search and 
> pounce" entries on a casual contest when it behaves like this.
> 
> Thanks for any suggestions,
> 
> Nyles
> KS4S
> 
> 
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net http://mailman.qth.net/mailman/listinfo/logic
> 
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.11/264 - Release 
> Date: 2006-02-17
>  
> 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date: 2006-02-17