[LOGic] Spotlog Intermittently Fails to SuppressPreviously Worked Stations

[Michael Herron]

It is beyond me. I use Logic6 still so not familiar with how things work in 
ver. 7.
 I am sure someone will reply who knows more.
----- Original Message ----- 
From: "Hank Phillips" <aa4hp at titustek.com>
To: <logic at mailman.qth.net>
Sent: Sunday, November 06, 2005 11:31 AM
Subject: Re: [LOGic] Spotlog Intermittently Fails to SuppressPreviously 
Worked Stations


> Sorry, I wasn't very clear on the configuration here.
>
> I normally run with "show all" unchecked, and spot level as "QSL has been 
> received."
>
> When you run with the show all mode enabled, those stations you worked 
> before in that band/mode are color coded blue, and that works as 
> advertised (even though advertised as red).
>
> I run the show spot as needed period as 120 days, although it probably 
> should be much longer, considering how long it takes to get a card.
>
> The spots that are re-posted are only a few hours to days old.
>
> Thanks for the help and I hope that is a bit more clear.  73,
>
> Hank
> AA4HP
>
>
> At 11:12 AM 11/6/2005 -0800, you wrote:
>>Not exactly sure what you are asking, but it seems that you have the "show 
>>all" box checked which of course processes all spots regardless of whether 
>>you have those entities credited to you in  your log or not. You may want 
>>to check your "Spot Level" as well. I do not think you can process just 
>>the RTTY spots alone but not sure if it can be done that way or not. K7MH
>>----- Original Message ----- From: "Hank Phillips" <aa4hp at titustek.com>
>>To: <logic at mailman.qth.net>
>>Sent: Sunday, November 06, 2005 9:42 AM
>>Subject: [LOGic] Spotlog Intermittently Fails to Suppress Previously 
>>Worked Stations
>>
>>
>>>I need a sanity check on this observation from the group.  I have 
>>>recently started working RTTY and have turned on "process rtty spots."
>>>
>>>Although I can't say this is absolutely related to rtty spot processing, 
>>>at about the  same time, I noticed stations I worked would continue to 
>>>show up in the spot log, regardless of the emission mode.  This is an 
>>>intermittent problem which I am continuing to try to characterize.
>>>
>>>Anyone else seen anything like this?
>>>
>>>Thanks and as always 73,
>>>
>>>Hank
>>>
>>>AA4HP
>>>
>>>
>>>_______________________________________________
>>>LOGic mailing list
>>>LOGic at mailman.qth.net
>>>http://mailman.qth.net/mailman/listinfo/logic
>>>
>>>
>>>--
>>>No virus found in this incoming message.
>>>Checked by AVG Anti-Virus.
>>>Version: 7.1.344 / Virus Database: 267.12.7/159 - Release Date: 11/2/2005
>>>
>>
>>
>>
>>--
>>No virus found in this outgoing message.
>>Checked by AVG Anti-Virus.
>>Version: 7.1.344 / Virus Database: 267.12.7/159 - Release Date: 11/2/2005
>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.1.344 / Virus Database: 267.12.7/159 - Release Date: 11/2/2005
>
> 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.344 / Virus Database: 267.12.7/159 - Release Date: 11/2/2005